ALIMAK SE


Passenger and freight elevators
Alimak SE passenger and freight elevators are designed from the drawing board not only to excel as people carriers in multiple applications, but also to be able to handle materials of loads up to 2,000 kilograms. All Alimak elevators are built to last in the harshest environments.

Industry mover and shaker
Alimak Hek has been an industry leader in supplying elevators based on rack & pinion drive technology for almost 50 years. Over 30,000 Alimak Hek rack & pinion solutions have been installed for a broad spectrum of industries around the world, giving us a unique and extensive engineering knowledge gained from each individual installation. Elevators from Alimak Hek daily demonstrate their ability to withstand the toughest challenges, providing safe, reliable access, anytime and anywhere needed, from silos, chimneys, and boiler houses, to warehouses, container cranes, underground shafts, hull columns, and derrick towers.

Modular system
The enhanced efficiency delivered by the Alimak SE line stems in part from the unique modular design of the cars that provides a remarkable 40 different car sizes within the standard range. All elevators are based on a variety of wall panels made of the Alimak self locking, aluminium profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations.

Main benefits
• No shaft is required – weight savings of up to 43,000 kg compared to other systems
• Modular design, delivering a wide range of car sizes and capacities
• Two individual elevators can operate on one single mast column for greater operational flexibility
• Drive machinery located on the car, means no costly machine room is required
• Fully collective elevator control system
• Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel.
All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars
• Wide range of optional equipment and functions, delivering you the right equipment for each individual task
• Remote Monitoring System – The online A3 remote control can also be added to monitor elevator operations 24/7 and pro-actively trace faults should they arise to reduce downtime.

Technical Data

Payload capacity: 300-2,000 kg
Loading classifications (ANSI): A class
Speed: 0.4 - 1.0 m/s
Max. lifting height: 250 m (increased lifting height on request)
Elevator car sizes: 30 car sizes available.
Car width (internal): 0.78 – 1.56 m
Car length (internal): 1.04 – 2.60 m
Car height (internal): 2.17 m
Motor control: Frequency control (FC) or Direct-on-line (DOL)
No. of motors: 1-2
Power supply range : 380 – 500 V, 50 or 60 Hz, 3 phase
Type of mast: “A” type, “A-Mini”, “FE” or “A-50”
Length mast section: 1.508 m
For other requests or features, please contact us.  

ALIMAK SL


Service elevator
Alimak SL 400 is a service elevator for permanent installation with a small installation footprint. The high efficiency helical gearbox saving operating costs. The Alimak SL 400 industrial elevator is designed for all kinds of industries. With the SL 400 elevator, customers are better able to access, monitor and service key processes in their plants, decreasing operational costs and increase uptime for their plants. Alimak SL 400 service elevators are built to last in the harshest environments.

Typical applications
Chimneys, transmission towers, bridge pylons, tunnels, nuclear power plants, coal transfer towers, silos, communication towers are typical applications.
Industry mover and shaker

Alimak Hek has been an industry leader in supplying elevators based on rack & pinion drive technology for almost 50 years. Over 30,000 Alimak Hek rack & pinion solutions have been installed for a broad spectrum of industries around the world, giving us a unique and extensive engineering knowledge gained from each individual installation.

Elevators from Alimak Hek daily demonstrate their ability to withstand the toughest challenges, providing safe, reliable access, anytime and anywhere needed, from silos, chimneys, and boiler houses, to warehouses, container cranes, underground shafts, hull columns, and derrick towers

• No shaft is required
• Drive machinery located on the car means no costly machine room is required
• Vertical bi-parting car doors with mechanical and electrical interlocking
• Landing doors with mechanical interlocking and electrical safety switch from car
• Full collective landing call function as an optional
• Safety features including safety device, door interlocking’s, emergency lowering device
• Durable materials: aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel. All stainless steel electrical cabinets

Technical Data

Max. payload capacity: 400kg
Travelling Speed: 0.4 m/s
Max. lifting height: 270 m*(increased lifting height on request)
Elevator car size: 0.8 m x 0.8 m x 2.2m (WxLxH)
Door opening: 0.7 m x 2.0 m (W x H)
Control system: Stop Next Landing or Push Button
Motor control: Direct-on-line (DOL)
No. of motors: 1
Power supply range: 380-500 V, 50 or 60 Hz, 3 phase
Type of mast: 350 or 350-Mini, tubular steel with integrated rack
Length mast section: 1,508 m
Min. installation space : 1.2 m2

ALIMAK SE-H


Alimak Hek has been an industry leader in supplying elevators based on rack & pinion drive technology for almost 50 years.

Passenger and freight elevators
Alimak SE-H passenger and freight industrial elevators are designed from the drawing board not only to excel as people carriers in multiple applications, but also to be able to handle materials of loads up to 3,300 kilograms. All Alimak elevators are built to last in the harshest environments.

Industry mover and shaker
Over 30,000 Alimak Hek rack & pinion solutions have been installed for a broad spectrum of industries around the world, giving us a unique and extensive engineering knowledge gained from each individual installation.
Elevators from Alimak Hek daily demonstrate their ability to withstand the toughest challenges, providing safe, reliable access, anytime and anywhere needed, from silos, chimneys, and boiler houses, to warehouses, container cranes, underground shafts, hull columns, and derrick towers.

Modular system
The enhanced efficiency delivered by the Alimak SE-H line stems in part from the unique modular design of the cars that provides 9 different car sizes within the standard range. All elevators are based on a variety of wall panels made of the Alimak self locking, aluminium profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations.

• No shaft is required – weight savings of up to 43,000 kg compared to other systems
• Modular design, delivering a wide range of car sizes and capacities
• Two individual elevators can operate on one single mast column for greater operational flexibility
• Drive machinery located on the car, means no costly machine room is required
• Fully collective elevator control system
• Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel. All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars
• Wide range of optional equipment and functions, delivering you the right equipment for each individual task
• Remote Monitoring System – The online A3 remote control can also be added to monitor elevator operations 24/7 and pro-actively trace faults should they arise to reduce downtime.

Technical Data

Payload capacity, (SE-H TM) 2,100–3,300 kg (increased capacity on request)
Loading classifications (ANSI) Class A, B, C1, C2, (C3)
Speed: 0.52 or 0.7 m/s
Max. lifting height 125 m (increased lifting height on request)
Elevator car sizes: 9 car sizes available
Car width (internal): 1.56 m – 1.82 m
Car length (internal): 2.60 m – 3.90*m
Car height (internal): 2.35 m
Motor control: Frequency control (FC)
No. of motors: 3
Power supply range: 380-500 V, 50 or 60 Hz, 3 faz
Type of mast: Square (A-50), tubular steel with integrated rack
Length mast section: 1,508 m

* Max. 3.12 m car length on 1.82 m elevator cars.

ALIMAK SE-H TM & TM EX


The high capacity ALIMAK SE-H TM & SE-H Ex TM goods and passenger elevator series fits in all kinds of industrial applications and are built to last in the most extreme environments. Alimak SE-H TM elevators are designed to transport materials weighing up to seven tonnes when required, and available for both safe areas as well as hazardeous areas.

Benefits at a glance
• Benefit from a highly useful variety of 35 large elevator car sizes, varying from the smallest providing 4.7 m2 (50 sq. feet) floor space to the largest car delivering 11.9 m2 (128 sq. feet) floor area
• Leverage a payload capacity of up to 7,000 kg (15,400 lb)
• Designed for harsh environments
• Explosion protected option
• Exploit the forklift truck loading functionality that means even a forklift or a pallet jack can be transported to different levels
• Plus, save time and money by removing the need for machine rooms and costly shafts

Elevator design
The enhanced efficiency delivered by the ALIMAK SE-H TM & SE-H Ex TM goods and passenger elevator series stems in part from the unique modular design of the elevator cars that provides a remarkable 35 different car sizes with floor spaces up to 11.9 m (128 sq. feet). Made of extruded anodized saltwater-proof aluminum and hot dipped galvanized steel, the Alimak SE-H TM elevator car is built to last in the most extreme environments. The elevator has been designed with two mast towers to carry the large elevator car and a sync axis, ensuring that the car always travels straight. Alimak SE-H TM elevator series are push button operated from car and landings and has a modern collective control system with internal fault diagnostics.

Compact, powerful drive units
Two compact and powerful drive units are located on top of the car itself, which means more useable space as there is no need for a separate machine room. Each drive comprises of four or six electric drive motors with a choice of direct-on-line control (DOL) or frequency control (FC). The FC drive not only ensures smooth acceleration and deceleration, but also reduces wear and tear on elevator components such as brakes.

Safety
The TM goods and passenger elevator series incorporates all the safety features that have made Alimak elevators a benchmark for the elevator industry worldwide. The unique progressive Alimak safety device comes into operation should the elevator exceed the rated speed, bringing the car to a smooth stop. The elevator is also fitted with an overload sensing device and a centrifugal brake that allows passengers to be lowered to the landing below in the event of a power failure.

Forklift truck loading
The optional car to landing lock device is used when fork­lift loading is demanded. The elevator has been designed in such a way that all of the forklifts in the world normally used for this kind of application fit in the car enabling easy transport of forklifts between landing levels. The load carrying structure is enhanced by the stiff car floor, which is welded of formed steel sheeting for additional strength.

Technical Data

Payload capacity, (SE-H TM) 3,200-7,000* kg
Payload capacity, (SE-H TM Ex) 2,500-5,000* kg
Loading classifications (ANSI) Class A, B, C1, C2, (C3)
Travelling speed: 0.52 m/s (105 fpm)
Lifting height Up to 70** m
Motor control: Direct-on-line (DOL) or Frequency Control (FC)
No. of motors: 2x2 or 2x3
Lift car sizes (SE-H TM): 35 car sizes available
Lift car sizes (SE-H TM Ex): 26 car sizes available
Car width (internal): 1.82 m – 2.86*** m
Car length (internal): 2.60 m – 4.16*** m
Car height (internal): 2.35 m or 2.50 m
Door opening height: 2.35 m or 2.50 m
Power supply range: 380–500 V, 50/60 Hz, 3 phase
Type of mast: Square (A-50), or rectangular (FE), tubular steel with integrated rack
Length mast section: 1,508 m
Protection class (ATEX): Zone 2, Gas group IIB, Temp. class T3

ALIMAK SE Ex


Passenger and freight elevators for hazardous areas
Built on the experience gained from thousands of installations worldwide, the new ALIMAK SE-Ex is designed to deliver on your access requirements for heavy transport needs in hazardous environments. The ALIMAK SE-Ex sets a new benchmark for the safer, efficient vertical transportation of personnel and materials on derricks, hull columns, platform modules, oil refineries, LNG terminals, chemical plants and other similar industrial environments.

New design, new flexibility
Increased efficiency, productivity and safety are just three of the benefits delivered by the new ALIMAK SE-Ex range of freight and passenger elevator solutions from the company that pioneered the rack and pinion drive system back in 1962 to safely and efficiently transport people and materials. The enhanced efficiency delivered by the ALIMAK SE-Ex stems in part from the unique modular design of the cars that provide many different car sizes within the standard range. All elevators are based on a variety of wall panels made of the characteristic Alimak self locking, aluminum profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations. A more rigid car design is built on a solid car floor and stiffened beams, which supports greater load capacity on a single mast.

Remote monitoring
The well proven Alimak Lift Control system ALC-II ensures both efficiency and ease of use. As an added bonus, Alimak Heks’ online A3 remote monitoring system can be fitted as an accessory. This gives the ability to fully monitor the elevator and trace any faults instantly from remote locations. This enhancement to our standard control system can speed up corrective diagnostics and minimize downtime.

Main benefits
• No shaft is required – weight savings of up to 43,000 kg compared to other systems
• Modular design delivering a wide range of car sizes and capacities
• Fully compliant with ATEX and EN-13463 as well as ANSI 17.1 and NEC codes. Witness tested by third party
• Two individual elevators can operate on one single mast column for greater operational flexibility
• Drive machinery located on the car means no costly machine room is required
• Fully collective elevator control system
• Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel. All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars are available
• Wide range of optional equipment and functions delivering you the right equipment for each individual task
• Remote Monitoring System – The online A3 remote control can also be added to monitor elevator operations 24/7 and pro-actively trace faults should they arise to avoid downtime.

Technical Data

Payload capacity, FC 1,200-2,500 kg
Max. payload capacity, DOL 450-1,200 kg
Loading classifications (ANSİ) Class A,B (C3 optional)
Travelling speed, FC 20.5 - 0.7 m/s
Travelling speed, DOL 0.4 – 0.6 m/s
Max. lifting height 80 m (increased lifting height on request)
Motor control Direct-on-line (DOL) or Frequency Control (FC)
No. of motors 1-3
Elevator car sizes 18 car sizes. Min 0.91 x1.30m, Max 1.30 x 2.73 or 1.56x2.21 m
Power supply range 380 – 480 V, 50 or 60 Hz, 3 faz
Fuse ratings 35 A, 63 A or 100 A
Type of Mast Rectengular (FE) or square (A50), tubular steel with integrated rack
Length mast section 1.508 m
Regulations ATEX or NEC
Protection class ATEX Zon 1or 2, Gaz grubu I, IIA or IIB, ısı sınıfı T1-T3 (T4)
Protection class NEC Class 1, Division 2, Gaz group C or D, Temp class T1-T3 (T4)
Dust, NEC Class 2, Division 2, Dust group F
For other requests or features, please contact us.  

ALIMAK SPECIAL

Special solutions are often requested by our customers. Here are some examples of what we can deliver:

Kungsträdgården Park, Stockholm
This special 3.5 tonne lift literally pops up from under the street. It is used by the Stockholm Water Company to transport service personnel and replacement parts to a pumping station 4 m below ground.

Royal Victoria Docks, London
Four external, panoramic hoists provide access to the new footbridge in London's Docklands. Each car takes 11 passengers and the total height of travel is 14 m.

New Telecommunications Centre, Kuwait
A twin-masted platform with a capacity of 12 tonnes is used by the Ministry of Public Works to service the new Telecommunications Centre. The platform travels a total of 62 m.

Technical Data

Payload capacity Biggest so far is 24,000 kg
Speed up to 1.0 m/s (depending on the capacity)
Max. lifting height Practically unlimited (highest so far is 645 m)
Lift car size Standard range modularity enables customised car widths and lengths
Motor control Direct-On-Line (DOL) or Frequency Control (FC)
Safety device type GF/GFD
Power supply range 380–690 V, 50 or 60 Hz, 3 phase
Type of mast Any suitable Alimak mast
Length mast section 1.508 m
Rack module 5 or 8

ALIMAK FM & FM-EX


The new four-masted ALIMAK FM cargo elevator series fits on all types of industrial applications and is available both for safe areas as well as hazardeous areas. The Alimak cargo elevator series is designed to handle materials weighing up to 12,000 kilograms when required. All Alimak elevators are built to last in the most extreme environments.

The typical Alimak cargo elevator has a payload capacity of between 5,000 kg to 12,000 kg. The cargo elevator ensures easy transportation of various heavy duty goods and consignments between different levels. Loading and unloading has never been easier with crane or forklift, since the elevator floor will level with top most landing without permanent equipment above.

Well proven in the offshore industry
The new Alimak FM builds on the experience gained from several installations offshore, which have been given a vote of confidence by customers across the industry. Made of hot dipped galvanized steel the Alimak cargo elevator handles the toughest working environments. Four galvanized mast towers / guide rails gives a very slim installation profile since they are recessed into the floor design. The Alimak elevator can be provided with a wide range of optional equipment and functions deliv­ering you the right equipment for each individual task.

Rack & pinion elevator benefits
The Alimak cargo elevator incorporates features that have made Alimak elevators a benchmark for the offshore industry worldwide, which elevators to less demanding environments takes advantage of. The Alimak FM cargo elevator platform have it’s drive machinery fitted beneath the elevator floor, along with brakes and gears, thus eliminating the need for a separate machine room or lift-well. The operation is not affected by rolls, pitches or heaves and the design is well suited for high earthquake loads. These benefits and the narrow installation profile makes the Alimak cargo elevator suitable for harsh environments.

Technical Data

Payload capacity: 5,000-12,000 kg
Static loading capacity Up to 15,000 kg
Travelling speed 0.25 m/s
Lifting height Up to 15* m
Motor control Frequency control (FC)
No. of motors: 8
Elevator platform width: (W) 3.35 m – 3.58* m
Elevator platform length: (L) 3.38 m – 4.54* m
Access opening: W -0.84 m, L -0.60* m
Power supply range: 380–690 V, 50/60 Hz, 3 phase
Type of mast: Square guide rail with integrated rack
Type of mast: 4
Length mast section: 1,508 m
Protection class ATEX: Zone 2, Gas group IIB, Temp. class T3

HEIS-TEK


Traction passenger and freight elevator for marine and offshore applications Heis-Tek traction passenger and freight elevators are designed not only to move people, but also to be able to handle materials weighing up to 2,500 kilograms when required. All Heis-Tek elevators are built to last in the most extreme environments.

Experienced supplier
Heis-Tek elevators have been supplied for the offshore market since 1996. The elevator is the perfect solution for Living Quarters, but also outdoor elevators complete with elevator shaft. Heis-Tek have maintenance agreement with BP, ConocoPhillips and Statoil. More than 1,500 Heis-Tek elevators have been supplied for both offshore and onshore applications.

Codes and regulations
Heis-Tek elevators comply with EN81.1:1998, ISO 8383, EC 95/16 and Norsok standard. The elevators are mainly designed according to client’s requirements.

• Individually tailored design for customer requirements
• New installations and elevators modernisations
• Modular design delivering a wide range of car sizes and capacities
• Energy efficient machinery
• Eco-efficiency
• Superior ride comfort
• Watertight elevator shaft
• Fully collective elevator control system
• Durable materials: stainless steel car wall panels and roof with car support frame of hot dip galvanized steel. Car floor of galvanized checker plate.
Wide range of optional equipment and functions delivering you the right equipment for each individual task

Technical Data

Payload capacity: 630-2,500* kg
Loading classifications (ANSI) Classs A
Travelling speed 1.0-1.6** m/s
Max. lifting height 80* m
Car width (internal): 1.2 m – 1.4*** m
Car length (internal): 2.2 m – 2.4*** m
Car height (internal) (H): 2.2 m – 2.4***m
Door opening (W x H): 1.0 m x 2.1 m***
Motor control Frequency control (VSD)
Power supply range: 380-690 V, 50 or 60 Hz, 3 faz

HEIS-TEK EX


Traction passenger and freight Ex elevator for marine and offshore applications
Heis-Tek traction passenger and freight Ex elevators are designed not only to move people, but also to be able to handle materials weighing up to 10,000 kilograms when required. All Heis-Tek elevators are built to last in the most extreme environments.

Experienced supplier
Heis-Tek elevators have been supplied for the offshore market since 1996. The elevator is the perfect solution for Living Quarters, but also outdoor elevators complete with elevator shaft. Heis-Tek have maintenance agreement with BP, ConocoPhillips and Statoil. More than 1,500 Heis-Tek elevators have been supplied for both offshore and onshore applications.

Codes and regulations
Heis-Tek elevators comply with EN81.1:1998, ISO 8383, EC 95/16 and Norsok standard. The elevators are mainly designed according to client’s requirements.

Technical Data

Payload capacity: 1,000 - 10,000 kg
Yükleme sınıflandırılması Class A, C1, C3
Travelling speed 0.5-1.0* m/s
Max. lifting height 50* m
Car width (internal): 2.0 m – 2.5* m
Car length (internal): 3.5 m – 4.0* m
Car height (internal): 2.5 m – 3.0*m
Door opening (W x H): 1.9 m, x 2.9* m
Motor control Frequency control (VSD)
Power supply range: 380–690 V, 50 or 60 Hz, 3 phase
Regulations: ATEX
Protection class ATEX: Zone 2, Gas group I, IIA or IIB, Temp. class T1–T3 (T4)